X
Valvoline › Industrinė ir auto chemija › Techniniai aerozoliai › Specialios paskirties produktai › Tarpinių valiklis GASKET REMOVER 500ml
Tarpinių valiklis GASKET REMOVER 500ml
C Prekės kodas: 887063&VAL
High quality spray for fast and easy removal of dried adhesives and seals, as well as
APPLICATIONS:
Cylinder heads
Gear boxes
Exhausts
Crankcases
Sanitary fittings
Water and oil pumps
Electro engines
PRODUCT CHARACTERISTICS:
User friendly
High dissolving properties
Optimum effect in view of high viscosity
Non-conductive
Slight gel structure
Non-corrosive
Directed jet spray
360° valve
TECHNICAL INFORMATION:
Contents 500 ml
Basis Dimethoxymethane
VOC-content Approximately 95% w/w
Colour Transparent
Scent Ether
Relative density @20°C 0,75 g/ml
Yield 1,0 – 1,5 g/sec
Vapour pressure @20°C 2 to 3 bar
pH-value Neutral
DIRECTIONS FOR USE:
Before use, carefully read the directions on thepackaging.
Valvoline™ Gasket Remover should be at room temperature before use. The processing
temperature should be between 5 to 30°C. Shake before use.
Cover lacquered and plastic parts Apply Valvoline™ Gasket Remover in an equal layer on the parts to be treated and allow to take effect for approx. 10 minutes.
Carefully remove the dissolved residues with a filling-knife.
With persistent contamination, repeat the treatment. Nuotraukos ir vaizdo įrašai yra iliustratyvūs.
APPLICATIONS:
Cylinder heads
Gear boxes
Exhausts
Crankcases
Sanitary fittings
Water and oil pumps
Electro engines
PRODUCT CHARACTERISTICS:
User friendly
High dissolving properties
Optimum effect in view of high viscosity
Non-conductive
Slight gel structure
Non-corrosive
Directed jet spray
360° valve
TECHNICAL INFORMATION:
Contents 500 ml
Basis Dimethoxymethane
VOC-content Approximately 95% w/w
Colour Transparent
Scent Ether
Relative density @20°C 0,75 g/ml
Yield 1,0 – 1,5 g/sec
Vapour pressure @20°C 2 to 3 bar
pH-value Neutral
DIRECTIONS FOR USE:
Before use, carefully read the directions on thepackaging.
Valvoline™ Gasket Remover should be at room temperature before use. The processing
temperature should be between 5 to 30°C. Shake before use.
Cover lacquered and plastic parts Apply Valvoline™ Gasket Remover in an equal layer on the parts to be treated and allow to take effect for approx. 10 minutes.
Carefully remove the dissolved residues with a filling-knife.
With persistent contamination, repeat the treatment. Nuotraukos ir vaizdo įrašai yra iliustratyvūs.
Perskaitykite visą aprašymą →
- Aprašymas
- Produkto informacija
- Panašios prekės
- High quality spray for fast and easy removal of dried adhesives and seals, as well as
APPLICATIONS:
Cylinder heads
Gear boxes
Exhausts
Crankcases
Sanitary fittings
Water and oil pumps
Electro engines
PRODUCT CHARACTERISTICS:
User friendly
High dissolving properties
Optimum effect in view of high viscosity
Non-conductive
Slight gel structure
Non-corrosive
Directed jet spray
360° valve
TECHNICAL INFORMATION:
Contents 500 ml
Basis Dimethoxymethane
VOC-content Approximately 95% w/w
Colour Transparent
Scent Ether
Relative density @20°C 0,75 g/ml
Yield 1,0 – 1,5 g/sec
Vapour pressure @20°C 2 to 3 bar
pH-value Neutral
DIRECTIONS FOR USE:
Before use, carefully read the directions on thepackaging.
Valvoline™ Gasket Remover should be at room temperature before use. The processing
temperature should be between 5 to 30°C. Shake before use.
Cover lacquered and plastic parts Apply Valvoline™ Gasket Remover in an equal layer on the parts to be treated and allow to take effect for approx. 10 minutes.
Carefully remove the dissolved residues with a filling-knife.
With persistent contamination, repeat the treatment. Nuotraukos ir vaizdo įrašai yra iliustratyvūs. Svoris 0.38 kg Plotis 650 mm Gylis 650 mm Aukštis 237 mm Pakuotės kiekis 12 Matavimo vienetas vnt. GTIN 8710941030166 Prekės kodas 887063&VAL